In an Eichler home, planning the wiring route is a big part of a panel upgrade. Slab floors, limited roof access and exposed ceilings leave fewer places to hide new wires. Plan the route before the work starts.
Key Takeaways
- In an Eichler home, planning the wiring route is a big part of a panel upgrade.
- Slab floors, limited roof access and exposed ceilings leave fewer places to hide new wires.
- Many Eichlers have slab floors, low-pitched roofs and exposed ceilings.
- The route should protect the home’s finishes and still meet electrical and utility requirements.
- A service upgrade usually needs coordination with the utility for the meter.
- A straightforward 100A to 200A upgrade typically starts around $1,500 to $3,000.
Why is a panel upgrade different in an Eichler?
Many Eichlers have slab floors, low-pitched roofs and exposed ceilings. That limits where new wires can run. The aim is to find a suitable path while keeping changes to exposed ceilings and architectural finishes to a minimum.
An LTE electrician says
“With slab floors and limited roof access, planning the wiring route is a major part of the job. The aim is to find a suitable path while keeping changes to exposed ceilings and architectural finishes to a minimum.”
What are the wiring route options?
- Accessible wall cavities.
- Existing pathways used by current wiring.
- Carefully placed surface conduit where concealing is not practical.
The route should protect the home’s finishes and still meet electrical and utility requirements.
Does the utility need to be involved?
A service upgrade usually needs coordination with the utility for the meter. In much of Granada Hills that is LADWP. LTE pulls permits where required. Check which utility serves your address before the meter work is booked.
What does the upgrade cost?
A straightforward 100A to 200A upgrade typically starts around $1,500 to $3,000. Relocating the panel or working around slab floors can add to that. You get a fixed written quote first.
What you can safely check
- The panel’s amp rating on the main breaker.
- Whether breakers trip often or feel warm.
- Where the meter and panel sit, so you can discuss relocation options.
Call an electrician if you notice
- Breakers trip when you run the oven, dryer or an EV charger.
- The panel is Federal Pacific, FPE, Stab-Lok or Zinsco.
- You plan to add an EV charger, heat pump or ADU.
Related reading
Next step
Ready to talk to an LTE electrician? Request service online or call (818) 392-5242.