Salt air can corrode an outdoor electrical panel, meter equipment and the connections inside. The important question is how far the corrosion has spread. A repair means fixing the damaged parts and the moisture entry, not painting over the rust.
Key Takeaways
- Salt air can corrode an outdoor electrical panel, meter equipment and the connections inside.
- The important question is how far the corrosion has spread.
- Coastal air carries salt and moisture.
- 1.
- If your panel is outside or close to the coast, look at it once or twice a year.
What does salt-air corrosion do to a panel?
Coastal air carries salt and moisture. Over time it can rust the enclosure, corrode terminals and breaker connections, and let water in. Corroded connections can run hot or fail.
An LTE electrician says
“The important question is how far the corrosion has spread. We need to assess the enclosure and electrical connections, address moisture entry and replace damaged components, not simply cover the rust.”
How is it repaired?
1. Assess the enclosure, meter equipment, terminals and breaker connections.
2. Find and fix how moisture is getting in.
3. Replace damaged equipment with suitably rated parts.
Painting over corrosion does not repair damaged electrical connections.
How often should I have the panel checked?
If your panel is outside or close to the coast, look at it once or twice a year. Call an electrician when you see rust, green or white crust, or water marks.
What you can safely check
- Look at the outside of the panel and meter for rust, flaking paint or crust.
- Check that the door closes and the seals are not cracked.
- Do not open the inner cover.
Call an electrician if you notice
- Rust or crust on the enclosure, meter or conduit.
- A breaker trips, buzzes or feels warm.
- Water marks inside the panel door.
- A burning smell.
Related reading
Next step
Ready to talk to an LTE electrician? Request service online or call (562) 376-2472.